Page Comparison

Source object for Contact Person in Activity. Option ‘Only cloud’ means that contact person property should be filled in FSM and will not be overwritten by SAP values (service order/notification/customer partner functions). If not entered in FSM, contact person will remain empty.

Customize what is sent as equipment in outbound activity idocs.

Send equipment from service order operation as activity equipment

Expand
title Click to expand the example
In transaction /PACG/ECM_ACTIVE, set the ‘Send Equi’ field to ‘Equipment from operation’.   Image Modified   Create a service order operation with equipment assigned.   Image Modified   After saving, the operation equipment can be found in a new /PACG/ECM_ACTIVITY_OUT idoc, segment ‘/PACG/ECM_IS_ACTIVITY’ and field ‘EQUIPMENT’. Image Modified

If field is checked notification plant ID in IDOC is taken from planning plant otherwise plant ID is taken from maintenance plant. Configuration is working when service notification is sent as activity to FSM.

Depends on selected option Activity subject can be send to FSM as:

• Activity number + operation short text

• Order number + operation short text

• Only operation short text

Example in FSM: Activity subject from activity number option

Image Modified

Use the operation’s long text as the activity’s remarks, instead of the service order’s long text.

Please note that starting form the Release 2111 this option will not be available - operation’s long text will be always used as the activity remarks. Additionally, the new option Order’s header long text to acti remarks will be available in transaction/PACG/ECM_SCTD.

Planning Times can be interpreted in Time zone of Customer (Setting in /PACG/ECM_COMP - Company definition). As company setting is for planning times & time effort, it can be overruled here.

Enter a service order partner function which should be used for service call and activity contact person determination. If lefft empty, value ‘CP’ will be used. Please note that contact person masterdata must be sent beforehand to FSM, otherwise the contact person in service call/activity overview will not be displayed correctly. Contact persons are sent together with customer master data.

Image Modified

SP&SH Partner Function from SC Definition - Partner role for “sold to” and “ship to” will be taken from settings t-code /PACG/ECM_SCTD (Sold to & Ship to)

Image Modified

SP&SH Partner Function from AC Property - partner role will be taken from configuration Activity Sold-To, Activity Ship-to

This values are stored in table /PACG/ECM_ACTI for created activity.

Allow operation update based on changes of activity in FSM, e.g. activity description/technician/dates update in FSM results in operation description/technician/dates update in SAP ECC/S4.

During creation of an activity, FSM Cloud Connector gets sales area from sales area assignment for object ACTIVITY with flag “default”. This means that all activities created during ASA event (in SAP ECC/S4) and during creation from FSM have only one sales area per company. This is not good for companies working with sales area assignment for service order and/or for service notification as a service call.

If this flag is set, FSM Cloud Connector:

1. Checks if the service order/service notification has an assignment to sales area (entries in transaction /PACG/ECM_SAASG - Sales Area Assignment for objects SERVICECALL - if it’s a maintenance order, or SNOTC, for service notification-based service calls)

2. Checks if the found sales area is set in a given order/notification

3. If it’s set and this sales area is also defined in transaction /PACG/ECM_SAASG - Sales Area Assignment for object ACTIVITY, then the Connector sets this sales area assignment for the processed activity (instead of the one marked as “default”).

By default, removing an operation in transaction IW32 will result in setting the related activities' status to ‘CLOSED’. To make it clear that an activity is closed because of a removed operation, a user-specified text can be added to activity remarks or the activity subject (as a prefix).

Image Modified

The attachment will be saved in SAP ECC/S4 on the activity level.

Image Modified

The attachment will also be available from the activity’s service order’s notification’s level in SAP ECC/S4.

Image Modified

Enter the text to be set as activity subject prefix or remarks for activities related to deleted operations. See field ‘RemvdOpAct’ above.

By default, removing an operation in transaction IW32 will result in setting the related activities' status to ‘CLOSED’. To make it clear that an activity is closed because of a removed operation, a user-specified workflow step can be set for such activities. Enter the name of a workflow step which should be assigned.

Image Modified

Image Modified

If left empty, no workflow step will be set.

This property lets selecting different interval for FSM Activities number range (/PACG/ECM1) than the default 01. The interval must be defined with SNRO before it can be used. In case provided interval didn't exist it will be created with the default range

PRTs of type ‘Document’ which are assigned to an operation will be transferred to FSM as activity attachments.  

Image Modified

Image Modified

Image Modified

More specifically, PRT document refer to DMS documents whose files will be transferred as activity attachments.

Image Modified

Activities can inherit attachments from the related service orders. When an attachment is created for a service order in SAP ECC/S4 and this field is checked, an attachment reference will be created for the related activities in SAP. Such new activity attachments will be automatically transferred to SAP FSM, if not blocked by the outbound configuration (e.g. setting ‘block out’ in the General configuration).

See: /PACG/ECM_CUST_ATTA - Inbound/Outbound Attachment Configuration

Example process

Expand
title Click to expand the example
Make sure that the ‘Link SAP Atta. of Service Ord. to Acti’ field is enabled. Create an attachment of any relevant type (GOS/BDS/DMS) for a service order. In the example below it is a SAP Office (GOS) attachment. Image Modified The attachment reference will be automatically added to the service order’s activity in SAP ECC/S4. Image Modified Additionally, the new activity attachment will be transferred to SAP FSM. Image Modified

Activities can inherit attachments from the related notifications. When an attachment is created for a notification in SAP ECC/S4 and this field is checked, an attachment reference will be created for the related activities in SAP. Such new activity attachments will be automatically transferred to SAP FSM, if not blocked by the outbound configuration (e.g. setting ‘block out’ in the General configuration).

See: /PACG/ECM_CUST_ATTA - Inbound/Outbound Attachment Configuration

Example process

Expand
title Click to expand the example
Make sure that the ‘Link SAP Atta. of Notification to Acti’ field is enabled. Create a new service notification and a related service order, so that an activity is generated. Image Modified Create an attachment of any relevant type (GOS/BDS/DMS) for the notification. In the example below it is a DMS attachment, created with transaction CV01N. Add the notification number as an object link. Image Modified Add an original file. Make sure to check it in. Save the document. Image Modified Open the document with transaction CV03N and notice that another object link - referring to the related activity - was added. Image Modified The new activity attachment will be transferred to SAP FSM. Image Modified

Attachments added to a service notification task in SAP ECC/S4 will be linked also to the activity created based on that task (integration scenario where notifications are used as service calls and their tasks as activities). The solution applies to GOS and BDS attachments (object type QMSM).

Enable inheriting equipment’s attachments by activities (after adding an attachment to equipment) if the equipment is assigned to the activity (field ‘Equipment’ in table /PACG/ECM_ACTI).

The equipment can also be added to the service order operation related to the activity or the header of the service order related to the activity.  

Attachments will be added to all open activities - if the configuration field is set and an activity or its reference object has the same equipment as the one to which an attachment was added. The logic is executed in Equipment event after attachment creation in SAP ECC/S4. The solution works with GOS, BDS and DMS attachments. 

Example 

Expand
title Click to expand the example
Check the ‘Link SAP Attachments form Equipment to Activity’ field for the test company.  Notice that the test equipment 10010859 is assigned to 2 activities (directly on activity level): Image Modified   Create a GOS attachment for the test equipment in transaction IE02: Image Modified   Outbound attachment idocs should be generated for both EQUIPMENT and ACTIVITY objects – the ones to which the equipment is assigned. Image Modified   Navigate to SAP FSM and notice that the equipment’s attachment can be found on both, activity and equipment level. Image ModifiedImage Modified

Attachments added to functional location in SAP ECC/S4 will be inherited by activities using this functional location ('Funct loc' in table /PACG/ECM_ACTI).

Example - GOS attachments added to functional location are inherited by existing activities using the functional location, as well as activities created later

Expand
title Click to expand the example
Add a GOS attachment to a functional location in transaction IL02: Image Modified Attachment reference is added also to the activity using the functional location: Image Modified The activity attachment is sent to SAP FSM: Image ModifiedImage Modified Create a new operation using the functional location: Image Modified The attachment is inherited by the new activity and sent to SAP FSM: Image ModifiedImage ModifiedImage Modified

Attachments added in SAP FSM with reference to activity will be added in SAP ECC/S4 as attachments to both the activity itself and its related service order.

Example process

Expand
title Click to expand the example
Add an attachment to an activity in SAP FSM. Image Modified The attachment will be saved in SAP ECC/S4 on the activity level. Image Modified The attachment will also be available from the activity’s service order’s level in SAP ECC/S4. Image Modified The attachment is resent to SAP FSM with reference to the service call and can be found on the service call level. Image Modified

Attachments added in SAP FSM with reference to activity will be added in SAP ECC/S4 as attachments to both the activity itself and its related notification.

Example process

Expand
title Click to expand the example
Add an attachment to an activity in SAP FSM. Image Modified The attachment will be saved in SAP ECC/S4 on the activity level. Image Modified The attachment will also be available from the activity’s service order’s notification’s level in SAP ECC/S4. Image Modified

Attachments added to a service notification task-based activity in SAP FSM will be linked also to the related notification task in SAP ECC/S4 (integration scenario where notifications are used as service calls and their tasks as activities). The solution applies to GOS and BDS storage methods.

Attachments added in SAP FSM with reference to activity will be added in SAP ECC/S4 as attachments to both the activity itself and the pointed equipment.

Equipment is primarily searched in table /PACG/ECM_ACTI for a given activity but it will be overwritten by BAdI implementation. Equipment is determined based on implementation of BAdI https://proaxia-prod-doc.atlassian.net/wiki/spaces/PFCC/pages/1466761219/BAdI+definitions#I_GET_EQUI_FOR_REFERENCE. The provided implementation’s logic is the following: create an additional attachment reference for equipment whose serial number can be found in the first (out of 3 or more) segment of the attachment’s name:

Image Modified

Image Modified

You can create your own BAdI implementation or disable the existing one, which will result in the equipment being determined solely based on assignment to the activity in table /PACG/ECM_ACTI.

Image Modified

Example

Expand
title Click to expand the example
Add an attachment to an activity in SAP FSM. Image Modified The attachment will be saved in SAP ECC/S4 on the activity level. Image Modified The attachment will also be available from the equipment’s level in SAP ECC/S4 - equipment related to the serial number from the attachment’s description. Image ModifiedImage Modified

Attachments added in SAP FSM with reference to activity will be added in SAP ECC/S4 as attachments to both the activity itself and its assigned functional location.

Functional location is searched in table /PACG/ECM_ACTI.

Example - attachments added to an activity in SAP FSM are added as GOS attachments to the assigned functional location

Expand
title Click to expand the example
Functional location is added as equipment to an activity: Image ModifiedImage Modified Storage type for inbound attachments set as ‘GOS’ in transaction /PACG/ECM_CUST_ATTA - Inbound/Outbound Attachment Configuration : Image Modified Create a new attachment for the activity in SAP FSM: Image Modified The new GOS attachment can be found in SAP ECC/S4, in the functional location’s attachment list: Image Modified The attachment inherited by the fuctional location is then sent to SAP FSM and can be found in the functional location’s master data: Image ModifiedImage Modified

Attachments added to activities in FSM and saved as DMS will be linked also to the related maintenance order operation.

Image Modified

Learn more: https://proaxia-prod-doc.atlassian.net/wiki/spaces/PFCC/pages/1624211457/DMS+attachments+added+to+maintenance+orders+SAP+S4+only#Creation-in-FSM.1

Make sure to execute the setup program before so that the following entry is created in /PACG/ECM_CUST_ATTA:

Image Modified

Link attachment from MSO activity in FSM to the header of MSO in Fiori app. Learn more:

Advanced Execution Service Order - Attachments

Link attachment from MSO activity in FSM to the Service Order Item which is inside of MSO order in Fiori app. Learn more:

Advanced Execution Service Order - Attachments