Page Comparison

In the standard, we use the material group to group the material in the cloud. In case of an entry here we use the product hierarchy instead.

For dummy material which results in service order text position

, you can use technical UDF on object ITEM enabling to overwrite material description in the app - if

the UDFs value is equal to "Y".

Expand
Image Added Value “Y” is set if for a given material/material group and company, an entry can be found in table /pacg/ecm_cmat2. Image Added The technical UDF needs to have the defined name - ‘COR_CLOUD_EDITNAME’ - otherwise FSM won’t react on it.

Remove leading zeros of material serial numbers. With this setting checked, the ‘SERNR’ field of /PACG/ECM_ITYPE_SERNR idocs no longer contains leading zeros.

When consuming a serialized part (a serialized item representing an equipment), it can be installed in equipment structure or replace another equipment (trigger dismantle of an existing part).  

Expand

Image Added To facilitate this process in the mobile application, the technician must specify the value of a special UDF and the equipment: - INSTALLATION SCENARIO - in which the serialized item should be installed - REPLACEMENT SCENARIO - the equipment which should be replaced by this serialized item Image Added During processing of a /PACG/ECM_GOODRECIN idoc (after material consumption), the UDF specified in the ‘UDF for action’ field is searched for in the idoc’s UDFDATA segments. The found UDF’s value is then used to determine whether an equipment (represented by serialized material) should be installed (value ‘2’), replaced (value ‘3’) or no action should be carried out (value ‘1’).

Forced equipment install or dismantle (related to the field ‘UDF for Item action’ above). If enabled, installation/dismantling will be performed even when configuration check errors such as ‘No function identifier maintained. Configuration check not possible’ (message CCMM043) occur.

Additionally, all error messages of type CCMM will be turned to warnings.

Use UII as the serial number. During transfer of serial numbers (idocs of type /PACG/ECM_ITYPE_SERNR) it is checked if this setting is set and the related object’s UII (Unique Item Identifier) is available.

Image Added

If so, the UII will be used as the serial number value (instead of the regular serial number).

Image Added

Specify the way of determining if a material should be sent as serialized to SAP FSM.

Image Added

During item transfer, plant assignment of the MDOC object is used to retrieve material’s serial number profile from table MARC. If a serial number profile is found, the item can be sent as serialized.

Image Added

Image Added

Default – use the material’s MARC data retrieved for the default MDOC plant to determine if the material is serial-managed. If a serial number profile is found for the default plant, the item will be transferred as serialized.

Image Added

Image Added

A, All plants - if no serial number profile value is found in table MARC for the material in the default MDOC plant, search it in the non-default plants. Only if no serial number profile is found in table MARC for any assigned plant, will the material be transferred as non-serialized.

Image Added

D, Delivering plant – if no serial number profile value is found in table MARC for the material in the default MDOC plant, search it in the material’s delivering plant (as sales area data use the default sales area of the ITEM object for a given company).

Image Added

Image Added

Only if no serial number profile is found in table MARC for both plants, will the material be transferred as non-serialized.

When ‘Unrestricted use minus reservations’ is selected, exclude reservations (reserved quantities) during calculation of item’s/batch’s stock quantity.

For batch quantity, subtract quantities from all the reservations where the material, the specific storage location and plant are used (deletion/final issue indicators are not set).

As a consequence, technician's will not be able to consume reserved quantities via unplanned consumption.

Example for item stock

Image Added

Standard calculation

Image Added

Subtract reservations

Image Added

Example for batch stock

Image Added

Standard calculation

Image Added

Subtract reservations

Image Added

If no batch-management indicator is found in table MARC, check valuation type and stock in table MBEW. If for the relevant plant the valuation type is not empty and stock value is bigger than zero, the material will be sent as batch-managed.

Set material as batchable if batch flag is set in one plant

With this option enabled which Connector checks in all relevant plants (all plants assigned to given company) if given material is batched or not and if in any of them it is then it will be sent to FSM as such

Example

1. 1. There are two plants in company XXXX

2. 2. There is a material A batched in plant 0001 and material B batched in plant 0002

3. 3. If this option is enabled both will be sent to FSM as batched