Specify which Measuring Point Categories are FSM-relevant.
This customizing can be used for the following purposes:
(S4)PACG 200 SP09 1. Enter Measuring Point Categories relevant for Measuring Point transfer
Only Measuring Points assigned to one of the entered categories can be transferred to FSM.
Learn more about the integration scope and other setup steps: Measuring points and measurements readings
2. Check if equipment is assigned to a specific Measuring Point Category for the purpose of checklist generation
3. The table is also checked in the example implementation of the BAdI below:
(S4)PACG 200 SP10 After delete entry from /pacg/ecm_meas, then selected measuring category is automatically soft deleted.
When measuring point has checked flag ‘soft deleted’, then measuring points and measuring readings are not more visible in FSM Mobile application.