🕑 DSM configuration
Displayed after selecting DMS as storage method in General attachment configuration/Advanced storage type determ., pressing ENTER and saving.
When migrating from (S4)PACG 200 SP03 or older, make sure to run the following report, if DMS storage type is planned to be used: Migration of DMS attachments (due to key change)
This node will appear, if the storage type is set to ‘D’ (DMS) in ‘General attachment configuration’ or ‘Inbound configuration’. Make sure to customize which document type, document status and storage category should be assigned to inbound attachments. It can be done based on the related object’s cloud message type. If no ERP object ID is entered, an entry will be relevant for all objects (unless the attachment matches another, more specific pattern).
ERP object ID | Object to which a file is attached to.  |
|---|---|
(S4)PACG 200 SP08 File Type | Store DMS attachments using different document properties, depending on the inbound attachment’s file type, as well as set different deletion options for various file types. The table below demonstrates priorities in the relevant DMS configuration entry determination, e.g. whenever an entry with the file type and company matching the ones of an inbound attachment can be found [3], it will be used instead of an entry where only file type is matching [7].  |
Document type | DMS document type to be used.  |
Document status | Status to be set for the document.  |
Cumulated | When enabled, the file added to an object in FSM will be added to the first DMS document found where the object is linked. Otherwise, a new DMS document is created for this attachment.  |
Default storage category DMS | Storage category links logical storage location with physical one.  |
Folder path | Specify path for document storage.  Field ‘Folder path’ should not be left empty, otherwise DMS attachment processing may fail. |
Deletion in FSM | Determine how deleting an attachment in SAP FSM (stored as DMS in SAP ECC/S4) should affect object links/references of the related DMS documents. ADD-ON 200 SP08 [ ] - remove all links and the file from the DMS document. Attachments for all the links removed from the DMS document will also be removed from FSM. R - Remove only the link to the object from which attachment was deleted in FSM If no link were left in the DMS document after deletion action, remove also the original (file) from the DMS document. N - No action - Do not delete any link/file/document in SAP ECC/S4 after attachment deletion in FSM. This option will prevent document deletion, even if option ‘Delete DMS document’ below would indicate otherwise. [ ] - default. If only one file (original) exists and the attachment was removed in FSM, delete the entire DMS document. If the document contained another file (original), which wasn't removed in FSM, then only the one deleted file is removed, not the entire DMS document. This behavior was the default in the previous FSM Cloud Connector versions. R - remove only the link to the main object (the object from which the attachment was deleted in FSM) from the DMS document  I - remove only the file from the DMS document (not the entire document, nor any object link)  F- both the object link and file will be removed from the DMS document E - remove the link, file and references. Both the object link and file will be removed from the DMS document. For all other object links in DMS document (e.g. references to other objects which inherited the attachment based on customizing in transaction /PACG/ECM_CUST_ATTA or hard-coded logic) delete request of attachment will be sent to FSM. These object links will however remain in the DMS document in SAP ECC/S4. |
Action on DMS doc. / OLD LABEL Delete DMS document | Customize handling of DMS documents after deleting a DMS attachment in SAP FSM. ADD-ON 200 SP08 [ ] - keep the document D - delete the document if no object links and files would be left |
Company-dependent DMS configuration
DMS configuration can be maintained for a specific company. If such an entry is found, it will be used instead of the default.