Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The previous steps: Create a checklist template

Checklists can be prefilled with measuring points data of the operation's equipment, or if not found, the service order header’s equipment.

Use transaction /PACG/ECM_CL_PREF -Checklist prefilling configuration to customize generation of prefilled checklists. Structure T_MEASURE_PTS is used to map measuring point data with checklist template fields:

The following measuring point data properties are supported by the standard solution and can be used in prefilled checklists without additional enhancements:

Measuring point and measuring position (obis code)

Upper and lower measurement range limits

Last measurement reading

Prerequisites

Apart from the prerequisites described on the following page: https://proaxia-prod-doc.atlassian.net/wiki/spaces/PFCC/pages/1166737418/PACG+ECM+CL+PREF+-+Checklist+prefilling+configuration#Preconditions, it is crucial that the activity’s operation has equipment assigned (if not found, equipment is searched on the service order header level). Measuring documents should be maintained for this equipment. Please remember that prefilled checklists will be generated only for activities with a technician assigned.

Another equipment determination source

If equipment ought to be determined differently, please implement the following BAdI:

enhancement spot /PACG/ECM_CHKL_PREFILLER → BAdI definition /PACG/ECM_FILL_COMM_STR_ACT_EQ, method GET_EQUIPMENT:

Example prefilled checklist instance

For the example checklist template, the following mapping is maintained in transaction /PACG/ECM_CL_PREF - Checklist prefilling configuration :

The checklist template has conditions assigned and is set as active for prefilled checklist generation:

Create a service order. Its operation should have a technician and equipment assigned. The operation’s equipment contains 4 measuring points, each one is represented as a series in the prefilled checklist instance:

The measuring point data from SAP ECC/S4 is reflected in the checklist instance in SAP FSM, based on the maintained mapping: