The setup of measuring point reporting process (using checklists) should start with creation of a checklist template adjusted to measuring point processing.
Checklist template overview
The template will serve the following purposes:
[SAP ECC/S4 → SAP FSM] It will be used to automatically generate a checklist instance for the technician - prefilled with equipment name, measuring point code, upper and lower limits and the value of the last reading. Learn more later on this page: https://proaxia-prod-doc.atlassian.net/wiki/spaces/PFCC/pages/1598324737/Measuring+point+reading+using+checklist+instances#Configure-generation-of-prefilled-checklists
[SAP FSM → SAP ECC/S4] A technician will use the checklist instance to enter reading values for relevant measuring points.
The following template consists of two chapters. The first one serves the purpose of measuring point reading collection, the latter as a summary.
It’s good practice to include field type in the field ID and use camel case, e.g. ‘TXT_MeasuringPoint'.
Equipment
The ‘Equipment’ field is a picker field which points to the equipment for which measurement is performed. This field will be prefilled from SAP ECC/S4.
Equipment measuring point series/table
Since the structure used for mapping of measuring point data with checklist template fields in SAP ECC/S4 (T_MEASURE_PTS) is a table structure, the corresponding fields in a checklist template must be part of a series or a table. The example series ‘Meter Reading’ consists of the following fields:
Field | Type | Prefilled from SAP ECC/S4 | Read-only |
|---|---|---|---|
Measuring point | Text input | X | X |
Obis Code | Text input | X | X |
Last Reading | Number input | X | X |
Meter Reading Result | Number input | ||
Lower Limit | Number input | X | X |
Upper Limit | Number input | X | X |
Download the example template
The following checklist template can be downloaded below: