This is a transaction for manual sending of functional location master records from SAP ECC/S4 to FSM.
Usually, execution of this transaction is not necessary. The initial functional location transfer can be performed via the so-called full sync (see Full sync). Additionally, due to event implementation, newly created or updated functional locations (IL01/IL02) will be transferred automatically.
Use this transaction to transfer singular objects to FSM or to unblock objects when other solutions fail.
FuncLoc ServOrd | Send functional locations only if they had already been sent before. The setting prevents sending functional locations not used by any service order. |
|---|---|
Send Subhierarchy | Trigger sending of functional locations and equipments belonging to the structure of the functional location being sent.  |
(S4)PACG 200 SP08 Created on | Transfer functional locations that ware created on a given date or within the defined date range |
(S4)PACG 200 SP08 Changed on | Transfer equipment that was changed on a given date or within the defined date range |
(S4)PACG 200 SP09 Send measuring points | During functional location transfer, measuring points assigned to the functional location will be additionally sent. They’ll be visible on the FSM mobile application, on the functional location’s record. |
(S4)PACG 200 SP09 Send measuring points with doc | During functional location transfer, measurement points and documents created for the functional location will be additionally sent. They’ll be visible on the FSM mobile application, on the functional location’s record. |