This is a transaction for manual sending of functional location master records from SAP ECC/S4 to FSM.
Usually, execution of this transaction is not necessary. The initial functional location transfer can be performed via the so-called full sync (see Full sync). Additionally, due to event implementation, newly created or updated functional locations (IL01/IL02) will be transferred automatically.
Use this transaction to transfer singular objects to FSM or to unblock objects when other solutions fail.
FuncLoc ServOrd | Send functional locations only if they had already been sent before. The setting prevents sending functional locations not used by any service order. |
|---|---|
Send Subhierarchy | Trigger sending of functional locations and equipments belonging to the structure of the functional location being sent.  |
(S4)PACG 200 SP08 Created on | Transfer functional locations that ware created on a given date or within the defined date range |
(S4)PACG 200 SP08 Changed on | Transfer equipment that was changed on a given date or within the defined date range |
(S4)PACG 200 SP09 Send measuring points | During functional location transfer, measuring points assigned to the functional location will be additionally sent. They’ll be visible on the FSM mobile application, on the functional location’s record. Learn more about the integration scope and setup steps: Measuring points and measurements readings (Since (S4)PACG 200 SP10, a checkbox, not a radio button. When selected, option ‘Send measuring documents’ appears.) |
(S4)PACG 200 SP10 Send measuring documents / (S4)PACG 200 SP09 Send measuring points with doc | During functional location transfer, measurement points and documents created for the functional location will be additionally sent. They’ll be visible on the FSM mobile application, on the functional location’s record. Learn more about the integration scope and setup steps: Measuring points and measurements readings (Since (S4)PACG 200 SP10, a checkbox, not a radio button.) |