/PACG/ECM_EQ1 - Equipment Settings

Customize sending rules for equipment and functional location. Possible options are: only equipment, only functional location, both.

E.g. it’s not possible to send an equipment with the sending transaction if 'Equi&telo' is set to ‘Only Functional Location’,

Defines the source of the Equipment Text, either from the Equipment, from the Characteristics or from the internal Note. See also /PACG/ECM_EQCHA - Equipment Characteristics

Defines the source of the Technical Location Text, either from the Technical Location or from the Characteristics or the internal Note

Send Equipment also when Sold-to is empty

Send Technical Location also when Sold-to is empty

Standard, Equipment - or Equipment ship-to

Define Notification type per Equipment (History will be written into Notification)

Define Notification Type per Technical Location (History will be written into Notification)

GOS Attachments per Equipment / Technical Location will be transmitted.

Rule for Equipment name generation

Use Planning Plant, not maintenance plant to determine sending relevance

Do not use Equipment ID as Manufacturer serial number

Equipment's Partner Source - controls where the information about business partners is taken from:

Following options are available:

• Equipment ('space') - Read partners from equipment

• Functional location ('X') - Read partners from related functional location

• Functional location, Equipment ('A') - Read partners from the related functional location and if there is no related functional location then read partners from equipment.

• (S4)PACG 200 SP07 Equi or Inherit partners from parent object ('B') - Read partners from equipment and if no partner roles were defined for that equipment get partners inherited from parent object in the equipment structure. This option works in an analogical way in case of functional locations.

Partner Function

Specify which partner (based on the entered partner function) should be sent as equipment’s Business Partner. E.g. if ‘SP’ is entered, the equipment’s sold-to party Partner will be sent as Business Partner.

Partners are retrieved from table IHPA (Plant Maintenance: Partners).

Define a partner role which represents the person responsible (owner) for the tool. The owner should be sent to the cloud.

When enabled, IFLOT-TPLNR (functional location ID) will be used to build functional location key instead of IFLOT-ILOAN (Loc/AccAssmt).

Send master data for all equipment/functional location related to the service order.

Deletion Flag of Equipment Leading Zeros

Equipment created in the FSM will be replicated to the FSM Connector and created in the system using this defined category. Currently selection of equipment category directly in FSM is not supported.

When sending equipment/functional location, generate outbound idocs with all the equipments/functional locations belonging to the structure of the one that was initially being sent.

This parameter, if filled, controls the number of equipment sent to FSM when sending of subhierarchy is enabled. It is meant to prevent accidental sending of hierarchies containing thousands of elements. It is applicable only if sending of subhierarchies is enabled.

When the value is empty, the parameter is ignored by the Connector.

The default value of this parameter equals 1000.

This parameter is ignored in full sync mode.

Send Material from iBase as equipment

Enable sending of equipment ((S4)PACG 200 SP11 as well as functional location) characteristics values as UDF data (dedicated segments in outbound equipment idocs).

Learn more: Equipment/functional location characteristics - transfer and update

The setting enables sending equipment serial number without leading zeros (field ‘SERIALNR’ in idoc of type /PACG/ECM_ITYPE_EQUI).

To test the functionality, transfer an equipment with transaction /PACG/ECM_EQUI. The equipment should have a serial number maintained. Find the generated idoc of type /PACG/ECM_ITYPE_EQUI and notice that there are no leading zeros in the ‘SERIALNR’ field.

The leading zeros are absent in FSM too.

Functional location category

When a new functional location is added from FSM it will be created using this category

If checked, documents such as protocols and certificates attached in SAP ERP should be sent to SAP FSM as attachments linked to the tool equipment object  

If checked, Equipment of type ‘Tool’ should be sent to SAP FSM Cloud without an owner. This option allows to send the object without business partner. 

In case when the equipment (tool) is not linked with any partner and the option is checked the equipment (tool) is sent to FSM.

In case when the equipment (tool) is not linked with any partner and the option is not checked, the deletion IDOCs are created and the tool is not visible in FSM