/PACG/ECM_MEAS - Measuring Point Category

Specify which Measuring Point Categories are FSM-relevant.

Open

Open

Transaction IK03

 

This customizing can be used for the following purposes:

(S4)PACG 200 SP09 1. Enter Measuring Point Categories relevant for Measuring Point transfer

Only Measuring Points assigned to one of the entered categories can be transferred to FSM.

2. Check if equipment is assigned to a specific Measuring Point Category for the purpose of checklist generation

3. The table is also checked in the example implementation of the BAdI below:

(S4)PACG 200 SP10 After delete entry from /pacg/ecm_meas, then selected measuring category is automatically set as ‘Inactive’.